Isotherm Danfoss Fridge Compressor - BD35F 12/24V 381830 / SBC39302DA 

Danfoss compressor complete with condenser, tubing and quick connect couplings supplied as a replacement part for Isotherm® refrigeration units.
Although they are factory pre-gassed, the complete system must be evacuated and re-charged with ozone friendly R134A refrigerant upon replacement.

(The Electronic Control Module unit needs to be purchased separately - see below).


Practical Advice Tips

  • This fridge compressor requires the  Electronic Control Module unit to be purchased separately.
  • If your fridge compressor works only on DC (12 to 24Volt) choose the DC Electronic Control Unit.
  • If your fridge compressor works on both only DC (12 to 24Volt) and AC (such as 240Volt) choose the AC/DC Electronic Control Unit.
  • The condensation (compressor) unit must be installed horizontally with feet always downward and can run for short periods up to an angle of 30 °, greater angles can cause permanent damage to the compressor.
  • Although the system can operate up to a temperature of 55°C, we recommend placing it in the coolest place available, both for energy consumption and for qualitative yield of the unit.
  • Ensure that the compressor is sufficiently ventilated.
SKU 991323
Barcode # 9319786144701
Brand Isotherm
Shipping Weight 7.0000kg
Shipping Width 0.350m
Shipping Height 0.300m
Shipping Length 0.350m
Unit Of Measure Each

We Also Recommend

More From This Category