Isotherm Electronic DC Control Unit Module  - 381840 - SEG00002DA - DCModule 101N0212
Suits all DC Danfoss/Secop BD35 and BD50 Compressors Post 1998 (DC Only not AC)

101N0212 (also replaces the old 101N0210) - 101N0210 BD35/50F 12/24V TP39310

12-24 volt Electronic module for all DC only Danfoss BD35 and BD50 compressors, used on Isotherm® refrigeration since 1998.
Connects to the compressor with three pins.This is the latest version of the DC module for BD35 and BD50 compressors.

It is a direct replacement for Part number 101N0210, SECOP part number #101N0212, and Frigoboat part E50896.
Replacement 12/24V electronic module for Danfoss and SECOP BD35 and BD50 Compressors.
Case size: 2 5/8" x 4 1/8" x 1 3/4"

 

(991325)

Practical Tech Tip:

To test this module:

  • Put a jumper between the T (Thermostat) and C (Compressor) terminals.
  • The compressor should start and run at low speed.
  • If the compressor doesn't start, you may need to replace this module. 

Can easily be shipped Australia wide.

SKU 991325
Model # 101N0212
Barcode # 9319786144725
Brand Isotherm
Shipping Weight 0.7000kg
Shipping Width 0.100m
Shipping Height 0.100m
Shipping Length 0.150m
Unit Of Measure Each

More From This Category