Maxwell RC12-10 Winch w Capstan 1200W 12V P104909

Maxwell RC12-10 Winch with Capstan 1200W 12V P104909 - 12V Suits 10mm SL Chain & 16mm Nylon Rope

Suits:

Most boats up to 11m to 17m (35 Ft to 55 Ft)
10mm SL Chain and 16mm Rope Combo (soft spliced together) or all chain.

Specifications:

Motor: 1200W 12V
Rope Size: 16mm
Chain Size: 10mm
Maximum Pull Lift: 1134 kgs
Static Hold: 2200 kgs
LIne Speed: Chain 20m/min Rope 17m/minute
Net Weight: 32 kgs
Deck Clearance (G): 90mm (Contact Us if you need more)

Features:

The stainless steel (AISI 316).
This more powerful RC12-10 can be used with 10mm (3/8”) chain spliced to 16-20mm (5/8”) three strand or preferably 8-braid (plait) nylon rope.
The elegantly designed deckplate and chainpipe cover are manufactured in polished marine-grade (AISI 316) stainless steel, as are the heavy duty pressure arm, stripper, chainwheel and fluted capstan drum.
The extra large, through deck, hawse pipe throat, ensures easy entry of the rope/chain rode into and out of the anchor locker
Double cone-type brake/clutch mechanism permits ‘Free Fall’ anchoring. Cone clutches, unlike dog clutches, provide smooth progressive engagement, ensuring safe and precise operator control.
Emergency manual retrieval is made simple and easy with Maxwell’s unique “Active Latch Ratchet System” operation that prevents backwind of the windlass during manual hauling of the anchor.
New and innovative black, hard anodised gearbox provides numerous advantages:
- Fast and easy windlass installation
- More corrosion resistant
- Easy to maintain and service
- Takes up less room in the anchor locker
- 75:1 Ratio (RC12-10) or 100:1 Ratio (RC12-12), single stage design with less moving parts, for smoother and quieter operation
- Allows for multi-positioning of the gearbox/motor

Full details and dimensions are on the PDF brochure (above).

(992373)

What's In the Box?

Anchor Winch with gearbox
Chainwheel suits both chain and rope
Dual direction solenoid (included)
Emergency crank/clutch release handle (included)
Owners Installation manual with
- deck template,
- wiring instructions and
- installation instructions.

You will also need:

A correctly sized, circuit breaker and either two deck switches, and/or a panel up/down switch.
I strongly recommend using the Maxwell matched rope chain kit, as it transitions smoothly from the soft splice rope to chain, and, the chain wheel (gypsy) grips this rope very well. Plus, it is best of both worlds having chain (which doesn't chafe) near the anchor, and strong 8 plait rope (which is much lighter) for the rest.
(See Related Products shown below)

Other Accessories:

Browse the "Anchor Winch Electrical Accessories" category of this website for additional optional accessories such as remote controls and anchor chain counters.
Browse the "Additional Hardware Accessories" for items such as snubbers - (see the left hand menu).

Important: Maxwell windlasses must be used in conjunction with a chain stopper or alternative snubbing device to take the load off the windlass while laying at anchor. the chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.

Vetus Maxwell winches can easily be shipped to most of Australia - refer to the freight calculator.
We prefer a business address if possible - (someone will need to be present to sign for the delivery).

SKU	992373
Model #	P104909
Brand	Vetus Maxwell
Shipping Weight	34.0000kg
Shipping Width	0.600m
Shipping Height	0.500m
Shipping Length	0.600m
Shipping Cubic	0.180000000m3
Unit Of Measure	Each