Optional Roller Extender Kit  (Model 083) for L&R Boat Latch Kits 

Used where the roller needs to be able to project out further to the bow.

This L&R Roller Extender Kit (which is illustrated in green on the attached picture) will suit all the L&R launch and Retrieve Boat Latch Kits.
It is used where the roller needs to be able to project out further to the bow. It is commonly required on Towing Eye (Aluminium) boats.

As there are lots of different trailer winch posts  - this kit offers a quick fix without cutting, boring or welding if your Boat Latch Kit doesn't fit.

There are 4 adjustment horizontal positions  which allows the roller/wedge to swing up/down for vertical adjustment.

The bolts (which are not included), locate in one of these and the other pair of bolts go in slotted holes, allowing the roller/wedge to swing up/down for vertical adjustment.
It can project out 43 to 91 mm. (1.7" to 3.6 ").

Dimensions:

290mm x 95 mm (11.4x3.8 inches)
 

 

 

 

(991525)

Practical Advice and Tips:

You will need six ½ “ bolts 1” long (M12 x 25 mm) galvanised or stainless steel bolts with washers and nylon locking nuts.

L&R Boat Latch Kits and accessories can be delivered Australia wide.

SKU 991525
Model # Model 083
Brand L&R
Shipping Weight 0.4000kg
Shipping Width 0.095m
Shipping Height 0.005m
Shipping Length 0.300m
Shipping Cubic 0.013959000m3
Unit Of Measure Kit

More From This Category