Battery Switch On-Off Large Double Pole 2 Position 400A 113527 - SUR/720-DP

Recess or Surface Mount

Overall Size: 102mm x 89.4mm Height: 90mm

Designed to isolate both positive and negative circuits as required in some commercial vessel


  • installations. It is not recommended for switching house and start battery systems at the same time for safety reasons.
  • Removable rear cover insulates the rear terminals against short circuit and removable side plates provide access for heavy duty battery cables.
  • Suitable for surface mounting or recessed mounting in a 85mm hole. Screw holes 5mm roundhead. Ignition protected.
  • Continuous rating: 400 amps DC
  • Intermittent rating: 525 amps DC
  • Cranking rating: 1500 amps DC for 10 seconds
  • Voltage rating: 48 volts DC maximum
  • Terminal stud size: 4 x 12mm


SKU 991171
Model # 720-DP
Barcode # 9319786253663
Brand BEP
Shipping Weight 1.0000kg
Shipping Width 0.130m
Shipping Height 0.100m
Shipping Length 0.130m
Unit Of Measure Each

More From This Category