Replacement Bennett Standard Ram Actuator (For EIC)  A1101A - 499/351/1 - (Sold as each) 
Includes the EIC sender in the actuator - please specify port or startboard.
(These actuators have 4 rings at the base they were often used on Mustang 2800s)

Bennett hydraulic actuators move the trim tab planes.

Although the overall length may vary all models provide a 2.5″ standard stroke.

  • How To Identify Which Actuator You Have:

    Measure the overall length of the retracted actuator (from the very tip of the triangular top to the absolute bottom of the base lower hinge bracket).

  • The retracted overall length of the extra short hydraulic actuator is  270mm (10 5/8" ) - Fully extended is 333mm.
  • The retracted overall length of the short hydraulic actuator is 290mm (11 3/4") - Note most M80/M120 Sports kits have this one. Fully extended is 353mm.
  • The retracted overall length of this standard hydraulic actuator is 340mm (13 3/4"). Fully extended is 403mm.
  • If your boat has a control switch with Elecronic Indicator Lights (EIC) then you will need an EIC version actuator which include senders in them.
    Sold as each. Please specify port or starboard when ordering.

(992220)

Advice and Tips:

Includes an EIC sender in the actuator - please specify port or startboard.
The older models had a red or green wire (for port or starboard) the newer ones have a grey wire with a red or green sticker.

Most of the M80/120 kits use this actuator but there are also shorter and longer ones.
They are also common on larger boats such as Mustang 28s.

Although the overall length may vary all models provide a 2.5″ standard stroke.

  • How To Identify Which Actuator You Have:

    Measure the overall length of the retracted actuator (from the very tip of the triangular top to the absolute bottom of the base lower hinge bracket).

  • The retracted overall length of the extra short hydraulic actuator is  270mm (10 5/8" ) - Fully extended is 333mm.
  • The retracted overall length of the short hydraulic actuator is 290mm (11 3/4") - Note most M80/M120 Sports kits have this one. Fully extended is 353mm.
  • The retracted overall length of this standard hydraulic actuator is 340mm (13 3/4"). Fully extended is 403mm.
  • If your boat has a control switch with Elecronic Indicator Lights (EIC) then you will need an EIC version actuator which include senders in them.
    (Please specify port or starboard when ordering).

Sold as each.

SKU 992220
Model # 499/351-1 or 2
Brand Bennett
Shipping Weight 3.1000kg
Shipping Width 0.130m
Shipping Height 0.130m
Shipping Length 0.350m
Unit Of Measure Each

More From This Category