Maxwell HRC10-8 Winch w Capstan 1200W 12V 8mm P100242 - Suits 8mm SL Chain (Special Order)

NOTE: THIS IS THE 1200W winch - there is also a cheaper more popular 1000W version.

Suits:

  • Most boats up to 16m (52 Feet)*
  • 8mm SL Chain 

Specifications:

  • Motor: 1200W 12V
  • Chain Size: 8mm SL
  • Maximum Pull Lift: 850 kgs
  • Static Hold: 1500 kgs
  • LIne Speed: Rope 20m/minute or chain 24m/minute
  • Net Weight: 20 kgs

Features:

  • Fully Automatic rope/chain grip
  • This two piece watertight case allows for quick and easy, on-deck, routinemaintenance.
    Simple ‘bolt down’ installation ensures effortless and rapid on-deck installationand set up.
    The stainless steel (AISI 316) pressure arm always exerts maximum controlpressure on the rode (rope, splice or chain).
  • Cone type clutch/brake mechanism permits manual, ‘free fall’ anchoring andemergency crank recovery of the rode and anchor if required.• The sealed oil bath and marine-grade hard anodised, alloy gearbox provides highefficiency output drive via precision worm and wormwheel.
  • Revolutionary Wave Design™ chainwheel - suits rope and chain - grips the rope better.or can be used as all chain.

Full details and dimensions are on the PDF brochure (above).

(993119)

What's In the Box?

  • Anchor Winch with gearbox
  • Top Works
  • Chainwheel suits both chain and rope
  • Dual direction solenoid (included)
  • Emergency crank/clutch release handle (included)
  • Owners Installation manual with
    • deck template,
    • wiring instructions and
    • installation instructions.

You will also need:

  • A correctly sized, circuit breaker and either two deck switches, and/or a panel up/down switch.
  • I strongly recommend using the Maxwell matched rope chain kit, as it transitions smoothly from the soft splice rope to chain, and, the chain wheel (gypsy) grips this rope very well. Plus, it is best of both worlds having chain (which doesn't chafe) near the anchor, and strong 8 plait rope (which is much lighter) for the rest.
  • (See Related Products shown below)

​Other Accessories:

  • Browse the "Anchor Winch Electrical Accessories" category of this website for additional optional accessories such as remote controls and anchor chain counters. 
  • Browse the  "Additional Hardware Accessories" for items  such as snubbers - (see the left hand menu).

Important: Maxwell windlasses must be used in conjunction with a chain stopper or alternative snubbing device to take the load off the windlass while laying at anchor. the chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.

Vetus Maxwell winches can be shipped to most of Australia - refer to the freight calculator.
We prefer a business address if possible - (someone will need to be present to sign for the delivery).

SKU 993119
Model # P100242
Brand Vetus Maxwell
Shipping Weight 24.0000kg
Shipping Width 0.290m
Shipping Height 0.430m
Shipping Length 0.480m
Unit Of Measure Each

Vetus Maxwell 3 Year Warranty*

We Also Recommend

More From This Category