Mente Marine Auto Tab Control 520ACS RP Trim Tab Roll and Pitch Control

Mente Marine Auto Tab Control 520/ACS RP - Trim Tab Roll and Pitch Control
Trim Tab Position Indicator Control

Easily Retro Fit this EIC style dash control to existing hydraulic trim tab system, without having add actuator senders!
(The Mente's control unit simply senses the Voltage from the existing four wires which go to the hydraulic pump).

Note: If you have hydraulic trim tabs with a plain rocker switch then this is everything you need to make it EIC style control.
HOWEVER, if you have EIC hydraulic trim tabs then you will need to discard the relay and old blue wiring harness and buy a new style wiring harnes. Read our practical Tips Tab for full information).

Suits most popular trim tab brands:

Electro-mechanical trim tabs, Lectrotab, Lenco
Hydraulic trim tabs, Bennett, Instatrim
Planing and semidisplacement hulls
Shaftdrives, sterndrives, IPS and outboards
Boat lengths from 20 ... 50 feet

Features:

Trim Tab Position Display - theposition is estimated and displayed for all kinds of trim tabs

The wires of the existing actuators or hydraulic pump are connected directly to the backside of the control panel meaning a much simpler installation! (No more struggling with trim tab actuator sender units)!

Other Features Include:

The automatic control adapts to all sea conditions
Has Auto Trim Tab Retract feature (retract trim tab plane when not in use to prevent trim tab damage)
Auto control is suspended whilst the boat is off plane

(993803)

Practical Advcice & Tips:

If you have old hydraulic trim tabs with a plain euro style rocker switch:
Then this is everything you need to make it EIC style control.
All you need to do is remove the old euro dash control, mount the new Mente control, and attach positive & negative power to it.
Then simply plug in the four existing wires into the Mente control (the 4 wires which came from the hydraulic pump to the old control unit).

If you have hydraulic trim tabs with an old EIC control then you will need to discard the relay, and the old blue wiring harness, and buy a new style wiring harness.
(Contact Us)

SKU	993803
Brand	Mente
Artist / Author	Ruth Cunningham
Shipping Width	0.140m
Shipping Height	0.260m
Shipping Length	0.280m
Unit Of Measure	Kit

Be The First To Review This Product!

Help other Boat Gear Australia Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category

Bennet Extra Short Ram Rivet Clear - Suits EIC -

$395.00

9% OFF RRP $433.71

Bennett 75mm Brass Threaded Extension Pipe

$26.00

Bennett Actuator Wire Extension 20Ft 6m BAW2020 fo

$139.00

Bennett 10Ft Hydraulic Tubing for Trim Tabs

$79.00

Bennett EIC Flybridge Grey Wiring Harness 20Ft 499

$309.00

5% OFF RRP $324.16

Bennett Standard Ram Actuator A1101A - For EIC

$395.00

9% OFF RRP $433.74

Welcome to our website.
If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Boat Gear Australia’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Boat Gear Australia P/L’ "Boat Gear Australia" or ‘us’ or ‘we’ refers to the owner of the website whose registered office and trading address is Boat Gear Australia Pty Ltd located at Unit 14, 30-34 Octal St Yatala Qld 4207.
Our ABN is 89 629 049 038.
The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your personal customer general information and use only, it may not be used for commercial purposes.
It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction of photos, text, content or any other part of this website is prohibited unless written approal is given by the Managing Director of Boat Gear Australia P/L.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use or copying of any content of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

Mente Marine Auto Tab Control 520ACS RP Trim Tab Roll and Pitch Control

Easy to fit Retrofit EIC

Calculate Shipping

Be The First To Review This Product!

More From This Category

Be The First To Review This Product!

More From This Category

Terms & Conditions

Privacy Policy