Secop Electronic Control Unit Gen2 101N0680 Suits DC BD35/BD50 Post 1998 - Replaces 101N0212 and 101N0210
Suits all DC Danfoss/Secop BD35 and BD50 Compressors Post 1998 (DC Only not AC)

Genuine Secop brand will suit DC Danfoss BD35 and BD50 compressors that are DC only.

NEW GENERATION Imroved DC Control Module.

The old generation of modules was based on ST7 microcontroller technology.
Due to the end of life of this old ST7 microcontroller, Secop has developed new electronic units (101N0680 and 101N0242) based on STM32 microcontroller technology.

101N0212 (also replaces the old 101N0210, 101N0212) - 101N0210 BD35/50F 12/24V TP39310

12-24 volt Electronic module for all DC only Danfoss BD35 and BD50 compressors, used on Isotherm® refrigeration since 1998.
Connects to the compressor with three pins.This is the latest version of the DC module for BD35 and BD50 compressors.

It is a direct replacement for Part number 101N0210, 101N0212, and Frigoboat part E50896.
Replacement 12/24V electronic module for Danfoss and SECOP BD35 and BD50 Compressors.
Case size: 2 5/8" x 4 1/8" x 1 3/4"

(992360)

Practical Tech Tip:

To test this module:

  • Put a jumper between the T (Thermostat) and C (Compressor) terminals.
  • The compressor should start and run at low speed.
  • If the compressor doesn't start, you may need to replace this module. 

Can easily be shipped Australia wide.

SKU 992360
Model # 101N0212
Brand Isotherm
Shipping Weight 0.7000kg
Shipping Width 0.100m
Shipping Height 0.100m
Shipping Length 0.150m
Unit Of Measure Each

Be The First To Review This Product!

Help other Boat Gear Australia Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review