Bennett EIC Trim Tab Control Kit 12V 499/EIC5000 to Retro Fit

Electronic Indicator Control Kit for hydraulic trim tab systems only

Retro fit EIC - Electronic Indicator and Control (indicates trim tab plane position).

Three features combined into one sophisticated control — soft-touch helm control, trim tab indicator, and the auto tab retractor feature.
Water resistant, highly accurate, and features variable intensity LEDs for night or day.

This Kit is 12V and includes a 20 foot (6.06m) wiring harness - longer lengths also available see the Tips & Advice Tab.

Features Include:

  • Water-resistant keypad and connectors ensure years of trouble-free operation
  • EIC - Electronic Indicator and Control (indicates trim tab plane position)
  • Features a relay module mounted near the transom that simplifies installation by reducing the number of wires to run to the helm
  • Automatic trim tab retractor protects tabs from damage

(990421)

What's in the Box?

  • EIC Display (EIC001)
  • 12V EIC Relay Module (EIC101)
  • Sensor with 10′ SC Red and Connector (EIC901P)
  • Sensor with 10′ SC Green and Connector (EIC901S)
  • 25′ EIC Cable (EIC201) - longer available if needed - just add an wiring harness upgrade (SKU)
  • EIC Pigtail Pack (EIC401)
  • EIC Hardware Pack (EIC501)

Tips to check this kit will suit your boat.

  • The kit is 12v, (24V is also available)
  • The harness is 20ft - is this long enough for your boat? (longer harness swap available - just add the wiring harness upgrade - swap 20 foot to 25 foot (7.57m). (SKU 991545 ) - this shows up as an option at the checkout.
  • We suggest you count the number of rings on the existing trim tab actuators (rams).
    The senders included in this kit will suit the standard length 4-ring rams and the 3-ring short rams.
     (If you have the extra short actuators (which also have 3 rings) - then order this kit BUT notify us so we can substitute the senders to suit the extra short actuators.

Helpful Info:

M80/M120 Sports Kits Hydraulic Actuator Lengths when retracted:

  • The retracted overall length of the extra short hydraulic actuator is 10 5/8"
  • The retracted overall length of this short hydraulic actuator is 11 3/4"  - Note most M80/M120 Sports kits have this one.
  • The retracted overall length of the standard hydraulic actuator is 13 3/4"
  • (All the above actuators have the same stroke - 2.5")

Count the rings and if you are still unsure then measure the length of the ram and call or email us.

 

SKU 990421
Model # 499/EIC5000
Barcode # EIC5000
Brand Bennett
Artist / Author Ruth Cunningham
Shipping Weight 4.0000kg
Shipping Width 0.140m
Shipping Height 0.260m
Shipping Length 0.280m
Unit Of Measure Kit

You May Also Like

More From This Category