Complete Twin Engine Outboard Steering Kit with Fluid Link Kit COMKIT-1-DCFL8 - 3/8 Tubing Model

Hydrive Comkit1 Twin Cylinder Hydraulic Steering Kit for trailer boats or power catamarans with twin outboards under 200HP total.
Two COMKIT-1 511BH Cylinders - with a Fluid Link instead of a rigid  tiebar!

Suits twin counter-rotating outboards up to 200HP total counter rotating.
(can be used for non counter rotating outboards to a lesser maximum).

Hydrive offer this well priced hydraulic steering kit forboats with twin outboard monos or catamarans.

The fluid link means that you no longer need a rigid tiebar between the two outboards!
Instead this flexible link can easily run between the two outboards - this is also better if raising one engine and not the other. 
This kit has TWO COMKIT-1 series cylinders providing plenty of strength for larger vessels. 
(Note if the distance run between engine and helm exceeds 6 metres then the larger 12mm OBKIT-1 version kit is required).

This Hydrive COMKIT-1-DCFL8 Hydraulic Outboard Steering Kit includes:

• Model 401 Helm
• TWO x Model 511BH cylinders (Comkit-1 Cylinders)
• 3 litres ULTRA-15 fluid
• 1 x Fluid Link with CATN8 Balance Valve
• 1 x 15Mtrs 3/8” OD Nylon tubing
  (run between helm and motor must not exceed 6m - if it does use the 12mm dual kit.
• Bleeding Kit
• All fittings
• Installation Manual

Lastly, different brand and model outboards suit different steering kits, as outboards have slightly differnt heights which effects the height where the drag link arm attaches the outboard to the steering kit's cylinder.

If you are not sure which steering kit to use Boat Gear Australia can identify the correct one for you.
Just call or email me - you will need to know your outboard's brand, horsepower, year and whether it is a 2 stroke or a 4 stroke and ideally what brand and model boat you have.